磁栅单轴测控仪 TS-65

MAGNETIC SINGEL-AXIS CONTROLLER

准绝对式测量,磁性位移传感器艹电池+外部电源供电

Absolute type measuring, magnetic displacement sensor+Battery +external power supply

普通/伺服步进电机均可控制(端口不同）

Ordinary/servo/step motor can be controlled(port)

可显示的信息量大三排高亮数码管(7位+7位+4位)

Can display information: three rows highlighted digital tube（7位+7位+4位）

公制/英制可切换

Metric/inch swappable

单动/手动运行模式

Single-action/manual operation mode

10组预设工程数据存储

10 the default engineering data storage

菜单参数丰富,可自由设定

Rich menu parameters, can be set freel

工件计数功能

Artifacts counting function

自适应运动惯性

Adaptive motion inertia

自修正丝杆间隙误差

Since the fixed screw clearance error

高可靠性继电器(正反向+减速+完成)+晶体管脉冲(脉冲+方向)输出

Highly reliable relay (forward and reverse +speed +complete)+transistor pulse(pulse direction ) output

后备电池,即使外部电源断开,设备有位移,TS65也能实时跟踪测量

Backup battery, even if the external power supply disconnected，device has a displacement of TS65 real-time tracking and measurement

特性
features
技术参数
Technical parameters
备注
Notes

系统精度
System accuracy
±(0.03+0.01*L)mm
L单位为:米
Unit: m

重复精度
Repeat accuracy
0.01mm

测控范围
Range of measurement and control
-19999.9mm~99999.9mm
与分辨率设定有关
Associated with the DPI setting

显示分辨率
Display resolution
0.01mm/0.05mm/0.1mm
可设定
Can be set to

电源电压
Power supply voltage
AC220V/AC110V

后备电池
Backup battery
1节2号 1.5v(LR14)
1 2nd 1.5v(LR14)
寿命约2.5年
Life is about 2.5 years

整机功耗
Machine power consumption
小于4W

测控速度
Control speed
MAX2.5m/S

适用磁尺
Applied magnetic ruler
5mm+5mm

读头与磁带间距
Read head and the tape space
0.5mm------2.0mm

输出形式
Output form
继电器常开+常闭
Relay normally open + close

输出触点功率
Contact power output
AC220V/5A DC24V/10A

传感器线长度
Sensor cable length
1m------15m
可定制
Can be customized

传感器防护等级
Sensor protection rating
IP67

工作温度
Working temperature
-10℃......+60℃

存储温度
Storage temperature range
-30℃......+80℃

外壳
Shell
金属
Metal

TS-65其它优点

1:准绝对式测量,具备磁栅测量仪的一切优点,直接测量,无机械转换误差。
2:可控制普通或伺服/步进电机,全闭环,不同的端口输出不同的控制信号。
3:控制系统性价比高。

TS-65 other benefits
1 quasi-absolute measurements, with all advantages of magnetic measuring instrument, measuring, no mechanical conversion error.
2:General/servo/ stepper motors can be controlled, closed-loop, a different port to output different control signals.
3: control system for high performance-price ratio.